Professional manual
dispensers - CMS 350 DOTTY
Professional manual dispenser - CMS 350 DOTTY
The professional unit for the application of adhesives, solder
pastes as well as many other low viscosity products. The
dispenser CMS 350 DOTTY can work autonomously or in combination
with a pick & place unit.
DOTTY dispenser key features:
• Facility of use
• Different functioning uses
• Light
•
Best quality/price ratio for performance without equal
• Compacts
The DOTTY dispenser can work under many different
ways:
- Manual:
by pushing on the foot pedal, controlled compressed air is
allowed through to the syringe, hence forcing the medium out of
the tip. By removing foot from the foot pedal the deposit will
stop.
- Semi-automatic:
by pushing on the foot pedal, a x quantity of deposit is done
once. You need to push again on the pedal to start a
new deposit.
- Automatic:
remaining on the foot pedal, a x quantity deposit is done every
x repetitions until the foot pedal is released.
The dispenser comes complete with a set of needles, a set of
suction cups, a 10cc syringe and a foot pedal. The unit needs
to be
connected to compressed air.
Special Application Products Ltd
